Alimex Cast Plate 5754 is a tight tolerance surface machined plate with exceptional strong visual and aesthetic qualities after surface treatments are applied. The ultra fine homogeneous grain structure ensure that a very consistent appearance is achieved after anodizing. Alimex Cast Plate 5754 offers excellent material stability for even the most aggressive CNC milling operations. Alimex Cast Plate 5754R is the saw cut version of the alloy which is recommended for applications in larger plate dimensions or where surface machined top/bottom surfaces are not necessary.
Alimex Cast Plate 5754 is a high tolerance surface machined plate with exceptionally strong features regarding its visual and aesthetic qualities after additional surface treatments are applied. The ultra fine homogeneous grain structure and an extremely low micro porosity ensure that a very consistent appearance is achieved following anodizing treatments.
Furthermore Alimex Cast Plate 5754 offers excellent material stability and exceptionally good properties for even the most aggressive of CNC milling operations. Alimex Cast Plate 5754R is the 6-sizes sawn version of this particular alloy, which is recommended for applications in larger plate format dimensions or where surface machined faces are not directly applicable.
This particular alloy is exclusively available directly from Alimex or from its selected distribution partners.
Fields of Application
Electronic, laser, packaging, and optical industries
Medical and laboratory technology
Display, semiconductor, and solar equipment
ACP 5754 Specifications
Chemical Composition
EN AW-5754 (AlMg3), acc. to DIN EN 573-3
Material Properties
Machinability good (HSC/HPC excellent)
Weldability (TIG-MIG) very good (with SG-AlMg3)
Anodising Properties very good
Corrosion Resistance very good
Polishing good
Eroding Properties good
Typical Mechanical Properties
Tensile Strength Rm 180-210 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 min. 72 MPa (N/mm2)
Elongation A5 % min. 26
Brinell Hardness HB min. 50
Typical Physical Properties
Density 96*10-3 lb/cm3
Thermal Conductivity 75-86 Btu/(ft* h°F)
Electrical Conductivity ~35% IACS
Modulus of Elasticity 10.3*103ksi
Coefficient of Thermal Expansion 13.5* 10-6/F
ACP 5754
Thickness Range & Sizes
Plates and pre-cut sizes between 0,1969” and 3,94” are available in the following dimensions:
Thickness max. Width* Length*
≥ 0,1969” x 59,84” x 118,90”
Blanks, rings and pre-cut sizes on request.
Tolerances
Surface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.0039”
Flatness 0.2362”-0,4724” thickness ≤ 0.0157”**
> 0.4724”-3.94” thickness ≤ 0.0051”**
Tolerance in Width for Plates 0/+0.3937”
Tolerance in Length for Plates 0/+0.5906”
Tolerance (L/W) for Sized Cuts DIN ISO 2768-m (closer on request)
* Further dimensions on request. Subject to technical change.
** Linear measured section 1 m
ACP 5754R
Thickness Range & Sizes
Plates and pre-cut sizes between 0,3150” and 13” thickness are available in the following dimensions:
Thickness max. Width* Length*
≥ 0,3150” x 59,84” x 118,90”
Blanks, rings and pre-cut sizes on request.
Tolerances
Surface sawn on all sides
Tolerance in Thickness 0/+0,1181” (closer on request)
Tolerance in Width for Plates 0/+0.3937”
Tolerance in Length for Plates 0/+0.5906”
Tolerance (L/W) for Sized Cuts 0/+0.1181” (closer on request)