Developed for innovative, high-end industries like the Electronics, Semiconductor, Solar, and Display Panel industries, ACP 5080S and ACP 5080RS provide material solutions for the most challenging and critical applications.
Through decades of practical application experience, continuous material research, development, and testing, ACP 5080S and ACP 5080RS provide good mechanical and physical properties as compared with similar competitors’ cast and rolled aluminum plates.
Material excellence and superiority is achieved through the proprietary smelting, manufacturing, processing and handling procedures and specifications employed in the production of this grade.
The material ACP 5080S / ACP 5080RS provides material solutions for the most challenging and critical applications of these market segments and is already approved by many industry leaders worldwide.
Fields of Application
Solar Industry
Semiconductor Industry
Display Industry
ACP 5080RS Specifications
Chemical Composition
EN AW 5083 (AlMg4.5Mn0.7) acc. to DIN EN 573-3 / 3.3547
Material Properties
Machinability excellent
Weldability (TIG, MIG) good (with S Al 5183)
Anodising Properties good (not decorative)
Polishing excellent
Corrosion Resistance excellent
Eroding Properties good
High Speed Cutting Properties excellent
Electrical Discharge Machining (EDM) good
Etching good
Cryogenic excellent
Diffusion Tightness excellent
Typical Mechanical Properties
Tensile Strength Rm 240-290 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 110-130 MPa (N/mm2)
Elongation A 5 % 15
Brinell Hardness HB 70
Typical Physical Properties
Density 96* 10-3 lb/in3
Thermal Conductivity 63- 81 Btu/(ft* h˚F)
Electrical Conductivity ~35% IACS
Modulus of Elasticity 10.3* 103ksi
Coefficient of Thermal Expansion 13.5* 10-6/˚F
Thickness Range & Sizes
Thickness between 0.3150“ and 22.44“ . Plates and pre-cut sizes in every dimension depending on the block formats.
Thickness max.Width* Length*
22.44“ x 51.97“ x 118.90“
22.44“ x 61.81“ x 144.49“
22.44“ x 85.04“ x 157.48“
> 85.04“ Width: Please see the product information for ACP 5080 GIANT / ACP 5080R GIANT
Tolerances
Surface sawn on all sides
Tolerance in Thickness +0.1181“/- 0” (closer on request)
Tolerance (W/L) for Cut Pieces +0.1181“/- 0” (closer on request)
Special Features
Especially homogenized / Stress relieved and tested / Reduced micro-porosity / Tested continuously